thecusn2200reset

2007年11月12日—Trypresstheresetbuttononthebackpanelduringbootup,thenitsIPaddresswillbechangedto192.168.1.100.Youmighthavetochangeyour ...,1.開始使用NAS之前，需先安裝硬碟，並執行ThecusSmartUtility工具程式來初始化磁碟陣列。·2.要順利初始化N0204/N2200，建議執行ThecusSmartUtility的電腦只指定 ...,TheThecusN2200'sfrontpanelhasthedevice'scontrols,indicators,andharddisk...ResetButton.•ResetstheN2200.•I...

factory reset without access to config page?

2007年11月12日 — Try press the reset button on the back panel during boot up, then its IP address will be changed to 192.168.1.100. You might have to change your ...

NAS 開機的時候卡在"Self testing..." 而且無法完成開機

1. 開始使用NAS之前，需先安裝硬碟，並執行Thecus Smart Utility工具程式來初始化磁碟陣列。 · 2. 要順利初始化N0204/N2200 ，建議執行Thecus Smart Utility的電腦只指定 ...

Thecus User's Manual V2.7

The Thecus N2200's front panel has the device's controls, indicators, and hard disk ... Reset Button. • Resets the N2200. • Immediately press the Reset button on ...

User manual Thecus N2200 (English

Thecus N2200 has 4 USB 2.0 ports, allowing users to connect multiple external devices for data transfer and backup. Does Thecus N2200 support RAID ...

N2200

The N2200 can be set up and installed in a snap and even features Thecus' brand-new ... Reset to factory default button; USB Copy button. Chassis. Metal Chassis.

Thecus N2200: User Manual | PDF

1. Select an existing user from the Local User Configuration screen. 2. Click on the Edit button, and Local User Setting screen appears. 3. From here, you can ...

can't reset password | Thecus User Group

I found an entry on the thecus site for a different NAS unit that explained to reset to factory default turn it off, pull the hard drives out, hold the reset in ...

User's Manual V2.9

The Thecus N2200's front panel has the device's controls, indicators, and hard disk ... Reset Button. • Resets the N2200. • Immediately press the Reset button on ...

Exit(끝내기)를눌러Windows Utility를종료하고N2200를PC/노트북에서사용하기시작. 합니다. Refer to user's manual in the CD for advanced settings and managements.

Thecus N2200 User Manual

From the System Network menu, choose the Nsync Target item, and the Nsync Setting screen appears. Enable or Disable your Nsync Target Server and press Apply to ...